1.8" 30GB TOSHIBA MK3008GAL IPOD 5TH HARD DRIVE HDD

Formatted capacity : 30GB
High Speed Digital Signal Processor Based Architecture
Low Power HDC
Advanced Power Management Control
Fluid Dynamic Bearing Spindle Motor Technology
SATA S.M.A.R.T Compliant
SATA 28-bit Address Feature Set
Multi-Burst On-The-Fly Error Correction
SilentSeek
Free Fall Sensor (optional)
Target Application

Drive Configurations Capacity * 30 GB
Interface PATA/ZIF
Buffer DRAM Size 2 MB
Byte per Sector 512
Rotational Speed 4200 RPM
Performance Specifications Average Seek time (typical) 15.0 ms
Average Latency 7.14 ms
Media Transfer Rate (Max.) 458 Mb/s
Interface Transfer Rate (Max.) 100 MB/s
Drive Ready Time (typical) 2.0 sec
Reliability Specifications Non-recoverable Read Error 1 sector in 10^13 bits
Controlled Ramp Load/Unload 600,000
Acoustics Idle 6 Bel
Performance Seek 1.8 Bel
Environmental Specifications Temperature / Operating 5 ~ 60 ℃
Temperature / Non-operating -40 ~ 85 ℃
Humidity (non-condensing) / Operating 8 ~ 90 ％
Humidity (non-condensing) / Non-operating 8 ~ 90 ％
Liner Shock (1/2 sine pulse) / Operating 600 G
Liner Shock (1/2 sine pulse) / Non-operating 1500 G
Vibration / Operating 0.67 Grms
Altitude (relative to sea level) / Operating -300 to 3.000 m
Altitude (relative to sea level) / Non-operating -400 to 15,000 m
Power Requirements Voltage 3.3V 5%
Spin-up Current (Max.) 400 mA
Seek (typical) 0.8 W
Read/Write (typical) 0.9 W
Idle 0.30 W
Standby (typical) 0.07 W
Sleep (typical) 0.07 W
Physical Dimension Height (Max.) 5.0 mm
Width 71.0 mm
Length 54.0 mm
Weight ( avg.) 48 g
　

1X1.8" 30GB HS030GB Hard Drive