1.8" 30GB HARD DRIVE REPLACE IPOD VIDEO 5Gen 5.5Gen MK3008GAL HS030GA ZIF CE HDD
Descriptions:
Compatibility
Brand new. This hard drive
can only be used in iPod video 5th and 5.5th generation to replace the
original 30GB MK3008GAL, 60GB MK6008GAH and 80GB MK8010GAH.
This hard
drive could not
be used in iPod classic and could
not
be used in Zune. Do not place wrong order.
Key Features:
Formatted capacity :
30GB
High Speed Digital Signal Processor Based Architecture
Low Power HDC
Advanced Power Management Control
Fluid Dynamic Bearing Spindle Motor Technology
SATA S.M.A.R.T Compliant
SATA 28-bit Address Feature Set
Multi-Burst On-The-Fly Error Correction
SilentSeek
Free Fall Sensor (optional)
Target Application
Drive Configurations
Capacity * 30 GB
Interface PATA/ZIF
Buffer DRAM Size 2 MB
Byte per Sector 512
Performance Specifications Average Seek
time (typical) 15.0 ms
Average Latency 7.14 ms
Media Transfer Rate (Max.) 458 Mb/s
Interface Transfer Rate (Max.) 100 MB/s
Drive Ready Time (typical) 2.0 sec
Reliability Specifications Non-recoverable Read Error 1 sector in 10^13
bits
Controlled Ramp Load/Unload 600,000
Acoustics Idle 6 Bel
Performance Seek 1.8 Bel
Environmental Specifications Temperature /
Operating 5 ~ 60 ℃
Temperature / Non-operating -40 ~ 85 ℃
Humidity (non-condensing) / Operating 8 ~ 90 ％
Humidity (non-condensing) / Non-operating 8 ~ 90 ％
Liner Shock (1/2 sine pulse) / Operating 600 G
Liner Shock (1/2 sine pulse) / Non-operating 1500 G
Vibration / Operating 0.67 Grms
Altitude (relative to sea level) / Operating -300 to 3.000 m
Altitude (relative to sea level) / Non-operating -400 to 15,000 m
Power Requirements Voltage 3.3V 5%
Spin-up Current (Max.) 400 mA
Seek (typical) 0.8 W
Read/Write (typical) 0.9 W
Idle 0.30 W
Standby (typical) 0.07 W
Sleep (typical) 0.07 W
Physical Dimension Height (Max.) 5.0 mm
Width 71.0 mm
Length 54.0 mm
Weight ( avg.) 48 g
1X1.8"
30GB HITACHI Hard Drive
